Battery storage
The same platform, applied to battery storage.
Racks, power conversion, thermal systems, and meters each report to their own controller. Connect the whole plant, stream every reading to one place, and watch health and duty from one screen.
What you connect
Wire up the equipment you already run.
A storage plant packs a lot of instrumentation into a small footprint. An edge gateway on site reaches each system over its native protocol and buffers locally, so an interruption does not stop it collecting.
Battery racks & modules
Track state of charge, cell voltages, and cell temperatures per rack and module to keep an eye on the health of every stack.
Power conversion systems
Read charge and discharge power, status, and fault codes from the converters that move energy in and out of the plant.
Thermal & auxiliary systems
Monitor HVAC, fire-safety status, and auxiliary power draw. These are the systems that quietly decide round-trip losses and safe operation.
Meters & grid connection
Collect import and export power and revenue-meter readings at the point of interconnection, alongside the racks behind it.
- OPC UA
- Modbus
- MQTT
- REST
What you see
Live telemetry, per asset and across the fleet.
Once data is flowing, every rack and converter is live and on a chart. Watch a single stack's health in detail, or a fleet of storage sites from one screen.
Live plant dashboards
Watch state of charge, power in and out, and temperatures update within seconds across the plant. One view for operations, and one across sites.
Per-rack charts
Open any rack and trend its cells to spot an outlier temperature, a drifting voltage, or a module aging faster than its neighbors.
Years of history
Keep a full-resolution window of recent operation plus rolled-up long-term history, so a duty cycle from last year is as easy to pull up as yesterday's.
Starter KPI pack
Battery storage is where our KPI packs land first: round-trip efficiency, cycle detection, and capacity fade come as reviewed definitions for the storage asset type; approve them once and they measure every matching site.
Agent-drafted KPIs
Name a KPI beyond the pack: an auxiliary-load ratio, a thermal excursion count. Specialist agents build it for that asset type, you approve it once, and it then measures every matching stack.
Plan & usage transparency
See exactly how many data streams, sites, and gateways you are using against your plan. No surprise overage, no hidden meter.
Alerts & control
Catch what matters. Adjust from the cloud.
Define alert rules once and apply them across every matching rack and converter. Adjust collection from the cloud, not from inside the container.
Fleet-wide alert rules
Write one rule for a cell over temperature, or for state of charge outside its band, and it applies automatically to every matching rack across the fleet.
Smarter than thresholds
Catch a signal that has gone stale, a temperature climbing too fast, or a fault that holds for a set duration. Acknowledge alerts to track who is responding.
Buffered through outages
If the site link drops, the gateway keeps recording the duty cycle and streams it up on reconnect.
Remote configuration
Raise the sampling rate on a rack you are investigating, or push updated gateway config to every storage site, from the cloud.
Understand the concepts
The reference guide behind this page, written for engineers and operations teams rather than for a search engine.
Get started
The same platform, applied to your fleet.
Request early access and we'll onboard your fleet, or walk through the platform with our team.