Solar plants
The same platform, applied to solar plants.
Inverters, trackers, weather stations, and meters each come with their own interface. Connect a multi-vendor plant, stream every reading to one place, and monitor and act across your sites.
What you connect
Wire up the equipment you already run.
A solar plant is many copies of the same equipment from different vendors. An edge gateway on site reaches inverters, trackers, and sensors over their native protocol, buffers locally, and a template you build once covers every identical unit.
Inverters
Read string currents, DC and AC power, temperatures, and status codes across the array, with a template you clone to every inverter on site.
Combiner boxes & strings
Collect string-level currents to localize an underperforming or failed string to its row, instead of hunting it down with a clamp meter.
Trackers & weather stations
Track position and faults from trackers, and collect irradiance and module temperature. Those are the reference inputs behind every performance number.
Meters & grid connection
Collect export power, voltage, and revenue-meter readings at the point of interconnection alongside the generation behind it.
- OPC UA
- Modbus
- MQTT
- REST
What you see
Live telemetry, per asset and across the fleet.
Once data is flowing, the whole plant is live and on a chart. Compare inverters against each other, or watch a portfolio of sites from one screen.
Live plant dashboards
Watch output, irradiance, and inverter status update within seconds across the site. One view for the plant, and one across the portfolio.
Per-inverter charts
Open any inverter and trend its strings side by side to spot a failed string, creeping soiling, or a unit clipping earlier than its neighbors.
Years of history
Keep a full-resolution window of recent operation plus rolled-up long-term history, so a season-over-season comparison is one request.
Agent-drafted KPIs
Name the KPI you care about: performance ratio, specific yield, a soiling or degradation signal. Specialist agents build it for that inverter or plant type, you approve it once, and it then measures every matching asset.
Plan & usage transparency
See exactly how many data streams, sites, and gateways you are using against your plan, so adding a site stays predictable.
Alerts & control
Catch what matters. Adjust from the cloud.
Define alert rules once and apply them across every matching inverter. Tune collection from the cloud instead of walking the rows.
Fleet-wide alert rules
Write one rule for output low against irradiance, or for a string current out of family, and it applies automatically to every matching inverter across sites.
Smarter than thresholds
Catch a sensor that has gone stale, a value drifting too fast, or a fault that persists for a set duration. Acknowledge alerts to track who is on it.
Buffered through outages
When a site loses connectivity, its gateway keeps recording, and the readings it held stream up once the link is back.
Remote configuration
Raise the sampling rate on an inverter you are investigating, or push updated gateway config across the portfolio, from the cloud. No site visit.
Understand the concepts
The reference guide behind this page, written for engineers and operations teams rather than for a search engine.
Get started
The same platform, applied to your fleet.
Request early access and we'll onboard your fleet, or walk through the platform with our team.