Fleetera is renewables-first today: wind, solar, battery storage, and hybrid plants. Buildings & facilities is on our roadmap.
Buildings & facilities
The same platform, applied to building systems.
HVAC, metering, refrigeration, and plant-room equipment usually sit in separate systems. Bring them into one model to watch energy and comfort across a building or a portfolio.
What you connect
Wire up the equipment you already run.
A gateway in the building reaches its mechanical and metering equipment over their native protocol and buffers locally, so building data keeps flowing through any interruption.
HVAC & air handling
Collect supply and return temperatures, fan speeds, and operating status from air-handling units and rooftop equipment, one asset per unit.
Energy & sub-metering
Read power, voltage, current, and consumption from main and tenant meters to see where a building's energy actually goes.
Plant rooms
Track chillers, boilers, and pumps, with their temperatures, pressures, and run status, modeled alongside the spaces they serve.
Refrigeration & cold chain
Monitor case and room temperatures and compressor status across refrigeration systems to protect comfort and stored goods.
- OPC UA
- Modbus
- MQTT
- REST
What you see
Live telemetry, per asset and across the fleet.
Systems that normally live in separate panels become one live view. Watch a single building in detail, or compare energy and comfort across a portfolio.
Live building dashboards
See temperatures, energy use, and equipment status update within seconds across a building's systems, so a comfort or efficiency issue is obvious at a glance.
Per-unit charts
Open any air handler, meter, or chiller and trend its variables to track down a hot floor, a runaway load, or a unit short-cycling.
Years of history
Hold a full-resolution recent window plus rolled-up long-term history. Compare this winter's energy against last year's in one query across both tiers.
Agent-drafted KPIs
Name the KPI you care about: energy use intensity, equipment runtime, out-of-hours consumption. Specialist agents build it for that equipment type, you approve it once, and it then measures every matching unit across the portfolio.
Plan & usage transparency
Track the data streams and sites you collect against your plan, so adding buildings to a portfolio stays predictable.
Alerts & control
Catch what matters. Adjust from the cloud.
Define an alert rule once and apply it across every building, and tune collection from the cloud instead of visiting each plant room.
Fleet-wide alert rules
Set a rule for a space or equipment type, say a temperature out of band or a refrigeration case too warm, and apply it across every matching unit and building at once.
Smarter than thresholds
Flag a meter that has stopped reporting, a temperature drifting too fast, or a condition that persists past a set time. Acknowledge alerts to track who is on each.
Buffered through outages
If a building's link drops, its gateway keeps recording and streams the energy and comfort history up on reconnect.
Remote configuration
Raise the sampling rate on a unit you are investigating, or push updated gateway config across a portfolio, from the cloud. No plant-room visit needed.
Understand the concepts
The reference guide behind this page, written for engineers and operations teams rather than for a search engine.
Get started
The same platform, applied to your fleet.
Request early access and we'll onboard your fleet, or walk through the platform with our team.